A tomato plant can look green, tall, and busy right up until flowering, then show you that the feed has been off for weeks. Pale new growth, curled leaf edges, weak flower clusters, and uneven fruit set usually start with the root zone. This tomato feeding example gives you a workable way to mix, measure, and adjust feed without changing five things at once.
The base nutrient must match the medium. Then you check pH and EC before deciding whether the plant needs calcium, magnesium, micros, silicon, or a flowering supplement. That order matters. A tomato cannot use a correction well if the base feed, pH, or root-zone EC is already wrong.
Start With Water and a Meter
Use the HM Digital HydroMaster HM-200 Portable pH/TDS/EC/Temp Meter before adding anything to your reservoir or watering can. Check the EC of your starting water first. That number tells you how much dissolved material is already present and gives context to every feed reading that follows.
For hydroponic tomatoes and coco tomatoes, a practical pH target is 5.8 to 6.2. In soil, most growers will work around pH 6.2 to 6.8. Do not chase a single tenth every day. Stay in range, watch the plant, and keep records of what went in and what came out.
EC needs change with plant size, light level, temperature, cultivar, and how often you irrigate. Young established plants may run well around 1.0 to 1.4 EC. Vegetative tomatoes often run around 1.8 to 2.2 EC. A healthy plant carrying flowers and fruit may use 2.2 to 2.8 EC. Start toward the lower end when plants are small, roots are recently transplanted, or your room is hot and dry.
Those are working ranges, not a reason to force a number. If runoff EC climbs well above the feed going in, salts are accumulating around the roots. Back off, correct the watering practice, and recheck. More fertilizer is not the answer to every tomato problem.
Tomato Feeding Example: Choose the Base Feed First
For tomatoes in potting soil or a soil-based raised-bed container, start with Bionova Soil Supermix Fertilizer. It is the base feed for the medium, so it goes into the water before mineral additives. Mix it at the label rate appropriate to the plant stage, then measure EC. A smaller tomato in early growth does not need the same concentration as a plant filling out a trellis under an LED.
For coco coir, use Bionova Coco Forte A+B. Keep Part A and Part B separate until each has been diluted into the water. Do not combine concentrates together. Coco is a responsive medium, but it also requires steady irrigation and a consistent nutrient program. Check input EC and periodic runoff EC so you can see whether the root zone is staying close to the feed you intended.
For recirculating hydro, drain-to-waste hydro, or a tomato growing in a home hydroponic system, use Bionova Nutri Forte A+B Hydro. Mix the two parts according to the label, measure EC, then adjust pH. In a reservoir, confirm pH and EC again after the solution has had time to fully mix. Temperature matters too. Warm nutrient solution holds less oxygen and can make a feed that looked fine on paper harder on roots.
One base feed at a time keeps the diagnosis clean. Do not stack Soil Supermix with Coco Forte A+B or Nutri Forte A+B Hydro. Match the base to the medium, then correct a specific need with a single-mineral product when the numbers and plant symptoms support it.
A Week-by-Week Tomato Feeding Example
The calendar is less useful than the plant stage, but a staged example helps you avoid feeding a fruiting formula to a plant that is still establishing roots.
Transplant Through Early Establishment
After transplanting, keep the base nutrient mild. For a soil tomato, mix Soil Supermix at the lower end of its label guidance. For coco or hydro, use Coco Forte A+B or Nutri Forte A+B Hydro at a concentration that lands near the low end of the young-plant EC range.
Add Bionova Roots during this establishment period according to its label. Roots is used when you want to support active root development after transplanting or when a plant needs to settle into a new medium. It is not a substitute for proper moisture. A tomato kept too wet in a cold root zone will not respond the same way as one with healthy root-zone conditions.
If you use Bionova SiLution, start it early and use it consistently at the label rate. Add SiLution to water before the base feed, mix well, then add the base nutrient. Silicon management works best as part of the regular program, not as a last-minute reaction after the plant has already been stressed.
Vegetative Growth
Once the tomato is making steady new leaves and branches, raise the base feed in steps rather than making a large jump. For many indoor tomato plants, 1.8 to 2.2 EC is a reasonable zone to evaluate. Use the meter, not a guess based on how dark the leaves look under grow lights.
At this stage, good irrigation matters as much as the bottle. In coco, frequent, appropriately sized irrigations help maintain a stable root-zone EC. In soil containers, let the medium dry back enough to keep air in the root zone, but do not swing repeatedly from dust-dry to saturated. Hydro systems need adequate circulation and an EC that stays stable between reservoir checks.
If new growth is pale while pH and base EC are in range, Bionova Micromix is the targeted product to consider. Micromix supplies trace elements. Use it as a correction, not as an automatic extra in every batch. Check pH first because micronutrient availability is strongly tied to pH.
Flowering and Fruit Set
When flower clusters are open and the first fruit is setting, maintain the base feed instead of abandoning it for a booster. Soil Supermix, Coco Forte A+B, or Nutri Forte A+B Hydro still provides the foundation. Bring EC up only if the plant is established, drinking well, and showing no sign of excess concentration.
Bionova PK 13-14 is the targeted addition for the flowering and fruiting phase. Use it at the label rate during the appropriate bloom window, alongside the correct base nutrient. It is not a replacement for base nutrition, and it should not be run heavily from the first true leaves through harvest. Tomatoes need balanced nutrition throughout their cycle, not one oversized hit of phosphorus and potassium.
This is also the time to watch calcium management closely. Calcium moves with water, so irregular watering can create a calcium delivery problem even when the feed contains calcium. If your source water is soft, your crop is pushing hard under strong light, or your feed plan calls for extra calcium, use Bionova Ca 15 as the specific calcium additive. Add it according to the label and avoid making a large correction without checking EC.
Magnesium is different. If older leaves show interveinal yellowing and your pH, EC, and base feed are already in order, Bionova MgO 10 is the targeted magnesium option. Do not add Ca 15 and MgO 10 just because tomatoes use both elements. Add the mineral that addresses the confirmed need, then give the plant time to respond.
A Simple Mixing Order That Prevents Confusion
Start with clean water and measure the starting EC. Add SiLution first if it is part of your program. Next add the correct base nutrient: Soil Supermix for soil, Coco Forte A+B for coco, or Nutri Forte A+B Hydro for hydro. Add any needed single-mineral correction after the base feed, then use PK 13-14 only during the appropriate flowering and fruiting period.
Mix thoroughly between each product. Measure EC after all nutrients are in solution. Adjust pH last, then write down the final pH and EC. The next time a tomato looks off, those notes will tell you whether the issue followed a feed change, a hot day, a missed irrigation, or a root-zone buildup.
A good tomato feeding program is usually quiet. The plant grows steadily, the root zone stays in range, and you make small corrections based on measurements instead of reacting to every leaf. Start with the base feed that matches your medium, and use the HM Digital HydroMaster HM-200 Portable pH/TDS/EC/Temp Meter to make the next adjustment from a real number.
Shop: bdubbgrowsllc.com

